A-A-52083 (Formerly MIL-T-43435B Type IV) Fiberglass Lacing Tape braided with glass yarns individually coated with PTFE fluorocarbon MIL-Spec D finish prior to braiding. An additional coating must be specified if knot holding or fray resistance is required. Recommended for high temperature and hard vacuum/low outgassing applications. Approximate operating temperature range is -100°F (-73°C) to 800°F […]
A-A-52082 (Formerly MIL-T-43435B Type III) Lacing Tapes braided with PTFE fluorocarbon yarns. Recommended for hard vacuum/low outgassing applications and is highly resistant to fuels and chemicals. Available either uncoated or with synthetic rubber to improve knot strength properties. Approximate operating temperature range is -100°F (-73°C) to 450°F (232°C). Standard color: Natural (dark brown). Suggested Coatings: […]
A-A-52081 (Formerly MIL-T-43435B Type II) Polyester Lacing Tape braided with high-tenacity polyester yarns and impregnated with the required finish. Approximate operating temperature range is -100°F (-73°C) to 350°F (177°C). Standard colors are Natural and Black. Special colors are available on request. Suggested Coatings: “X” Uncoated (Mil-Spec: A), “W” Wax (Mil-Spec: B), “G” Synthetic Elastomer (Mil-Spec: […]
A-A-52080 (Formerly MIL-T-43435B Type I) Nylon Lacing Tape braided with high-tenacity nylon (polyamide) yarns and impregnated with the required finish. Approximate operating temperature range is -67°F (-55°C) to 325°F (162°C). Standard colors are Natural and Black. Special colors are available on request. Suggested Coatings: “X” Uncoated (Mil-Spec: A), “W” Wax (Mil-Spec: B), “G” Synthetic Elastomer […]
Nomex® Cord (Class H) Dupont’s Aramid yarn is twisted into a high-strength, smooth, round construction that resists high temperatures, is self-extinguishing, and suitable for hermetic and/or conventional applications. Suggested Coatings: “CL” Polyurethane, “X” Untreated. Part Number Approx. Diameter Inches Nominal Break Lbs. Yield Yds./Lbs. Uncoated Put-Up Tube NRT-1 .055 100 325 1 lb. NRT-2 […]
Pre-Shrunk Polyester Cord Less than 3% RS at 350°F/1hr. For fine wire or soft insulation systems where shrinkable tensions are undesirable. Available on a straight tube or cone wound. Suggested Coatings: “CL” Polyurethane, “W” Wax, “X” Untreated. Part Number Approx. Diameter Inches Nominal Break Lbs. Yield Yds./Lbs. Uncoated Standard Put-Up DRT-45PS .026 45 1300 […]
Polyester Cord (Class F)¹ Typical shrinkage 10-11% at 325°F/1hr. High-tenacity polyester yarn is twisted into a smooth, round, 3-ply construction. It provides improved heat range, added strength and excellent heat shrink characteristics. Increased yield over braided constructions makes it the most economical for high-volume automatic applications. Available on a straight tube or cone-wound. Suggested Coatings: […]
Motor-Ty Hand Tying Cord (Class F)¹ a 155°C hand-tying cord designed to upgrade and replace Class A cotton/linen materials, Motor-Ty utilizes continuous filament, high-tenacity polyester yarn, twisted into a smooth concentric cord, and impregnated with microcrystalline fungicidal wax. This provides superior temperature range, greater strength, lighter weight and lower costs than natural fibers. Part […]
Kevlar® Twisted Cord (Class H) A superior class “H” product that combines strength with high heat resistance. This Dupont Kevlar® twisted cord has good abrasion protection and has excellent solvent resistance. Suggested Coatings: “CL” Polyurethane, “W” Wax, “X” Untreated. Part Number Approx. Diameter Inches Nominal Break Lbs. Yield Yds./Lbs. Uncoated Standard Put-Up KRT-1 .060 […]
Dry Surge Ring Cable for VPI Systems Textured polyester yarn is braided into a flat, tubular construction. This dry Surge Ring encircles the end-turns and becomes a ridged, non-conductive band and/or restraining device. It is available with stranded Kevlar core (stronger than glass) for heavy-duty applications, or as a tubular sleeving for light duty or […]